SDR 35 PVC Solvent Weld Sewer Fittings
Injection Molded in Sizes 3” – 12”
Fabricated in Sizes 10” – 27”

Applications
Plastic Trends has the broadest product offering of Solvent Weld Sewer fittings in the industry. They conform to all municipal, federal, and military requirements. They are tested for joint tightness, internal stress and dimensional stability. The “P” Series is engineered for the harsh environment of construction, shipping, handling and installation.

Listed below are some of the uses of Solvent Weld Sewer fittings:

• Onsite Disposal
  • Closed loop septic fields
  • Open system septic fields
  • Engineered systems
• Surface Drainage
  • Foundation Drains
  • Radon Gas Venting
    
  • Yard Drainage
    • Downspouts
      
    • Pool Drainage
      
    • Area Drainage
      
    • Landscape Drainage
      
• Laterals to Municipal Sewers (sanitary and storm)

Certifications
Plastic Trends Solvent Weld Sewer fittings are third party tested and listed by NSF, UPC, and CSA to meet specifications defined in ASTM D 3034 and CSA B181.2.

Product Spotlights
Square X™ Countersunk Threaded Plug
SquareX™ is a major advance in countersunk threaded plug design. It features a unique molded-in shape and installs in seconds. Two standard screwdrivers provide plenty of leverage to tighten or loosen the plug. PVC threaded plugs are notorious for being difficult to remove and are often destroyed in the process. SquareX™ significantly improves the removal process and reduces the potential for breakage.

FlushMount™ Downspout Adapters
FlushMount™ lets you install pipe right up against the wall. They connect a downspout to either a smooth wall sewer pipe or corrugated drain pipe. Available in sizes 3”, 4” and 6”.

Short Form Specifications

4” through 12” injection molded solvent weld SDR 35 sewer fittings shall be manufactured in accordance with ASTM D 3034 and CSA B182.2. They shall be molded from virgin PVC compound having a minimum cell classification of 12454-B in accordance with, and certified by the National Sanitation Foundation (NSF), to meet ASTM D 1784. Solvent weld SDR 35 sewer fittings shall be certified by the National Sanitation Foundation (NSF) to meet ASTM D 3034, and, in applicable configurations, by the Canadian Standards Association (CSA) to meet CSA B182.2.