SDR 26 PVC Heavy Wall Gasketed Sewer Fittings
Injection Molded in Sizes 4” – 8”
Fabricated in sizes 10” – 18”
With a 34.5% thicker wall than SDR 35, high impact retention rings, and “I” Beam gussets at the branches and bends, Plastic Trends’ PVC Heavy Wall Gasketed Sewer fittings are manufactured to last. In addition, the 4” – 6” reducing branches on 8”, 10”, and 12” fittings have a minimum wall thickness of SDR 18. The distinctive green gasket is also heavy duty and engineered to make assembly fast and easy. Just push the pipe in until it hits the square stop for a solid, positive seal.
SDR 26 Heavy Wall Sewer fittings also feature the new high impact gasket retention ring design. The rings are colored green for easy field identification. For more information on the benefits on the new ring design, click here.
Applications
Heavy Wall Gasketed Sewer fittings can be used where extra heavy (SDR 26) is specified by your local jurisdiction. SDR 26 fittings are intended for non-pressure drainage of sewage and surface water.
Certifications
Heavy Wall Gasketed Sewer fittings are third party tested and listed by NSF to meet specifications defined in ASTM D 3034 and F 1336.
Heavy Wall SDR 26 New Ring Design
Spec Sheet
Short Form Specifications
4” through 18” gasketed SDR 26 sewer fittings shall be manufactured in accordance with ASTM D 3034 and F1336. Fitting gaskets shall comply with ASTM F 477 or ASTM F 913. Fitting gaskets shall be locked fi rmly in position to prevent displacement. 4” through 8” SDR 26 fittings shall have green color coded gasket retaining rings for easy identification. 4” through 8” fittings shall be injection molded from virgin PVC compound having a minimum cell classification of 12454-B in accordance with, and certified by the National Sanitation Foundation (NSF), to meet ASTM D 1784. 10” through 15” gasketed SDR 26 sewer fittings may be injection molded or fabricated from pipe meeting the requirements of ASTM D 3034. Gasket joints of all fitting sizes must comply with ASTM D 3212 Internal Pressure Test (exfiltration) and Vacuum Test (infiltration) at 5 degrees of gasket joint deflection. Gasketed SDR 26 sewer fittings shall be certified by the National Sanitation Foundation (NSF) to meet ASTM D 3034.
