PVC Perfect Fit™ Solvent Weld DWV Fittings
Injection Molded in Sizes 4” – 12”
Fabricated in Sizes 10” – 24”
The most complex installations require the most advanced fittings. Injection molded Perfect Fit™ DWV fittings from Plastic Trends eliminate typical problems resulting from installing a DWV system with inconsistent, inaccurate, or non-certified fittings. When installing or specifying Perfect Fit™ DWV you can count on a 45° bend being exactly that, a 45° bend. Literally from every angle, Plastic Trends understands the importance of accuracy and consistency on the job site and provides you with a perfect fit from roof to grade.
Perfect Fit™ DWV fittings make installation of the system quicker, easier and less costly. Productivity gains are significant when Perfect Fit™ DWV fittings are specified and installed. Combine with our fabricated fittings to ensure a trouble-free installation.
Perfect Fit™ PVC Solvent Weld DWV Fittings are third party tested and listed by NSF, UPC, and CSA to meet specifications defined in ASTM D 2665, F 1866, and CSA B181.2, where applicable. Fabricated fittings are listed by NSF and also conform to ASTM F 1866.
Plastic Trends is the only manufacturer to offer threaded, large diameter test tees and plugs. Injection molded up to 12” in diameter, they feature the most compact branch in the industry. Test tees are commonly used in DWV systems around columns or in raceways because it is in these areas where space is often a critical factor. Plastic Trends’ test tees are offered with a raised or countersunk plug.
Short Form Specifications
4” through 12” injection molded solvent weld Drain, Waste, and Vent (DWV) fittings shall be manufactured in accordance with ASTM D2665, F1866, F2135, and CSA B181.2, as applicable. Solvent weld DWV fittings shall be certified by the National Sanitation Foundation (NSF) to meet ASTM D2665, F1866, and ASTM F2135, as applicable; and by the Canadian Standards Association (CSA) to meet CSA B181.2 as applicable. They shall be certified by the International Association of Plumbing and Municipal Offi cials (IAPMO) to meet the requirements of the Uniform Plumbing Code (UPC), as applicable.