PVC Rigid Electrical Conduit Fittings
Injection Molded in Sizes ½" - 6"
Plastic Trends offers a complete line of rigid PVC electrical conduit and fittings. Plastic Trends’ non-metallic electrical conduit and fittings are certified by the CSA and UL where applicable, for use in above and below ground applications.
Plastic Trends rigid PVC electrical conduit systems are used in nonburial applications, encased in concrete, concealed in walls and direct burial applications:
- Cable, data and communication lines
- Institutional, commercial, industrial buildings
- Residential applications, including service entrances
- Street and highway underground feeds
- Transportation systems - subways, bridges, tunnels, airports
- Water and wastewater treatment plants
- Mines and mills
Price List Downloads
All wiring shall be installed in Plastic Trends rigid PVC electrical conduit and secured by means of proper fittings. All outlets, pull boxes and junction points shall be fitted with Plastic Trends outlet boxes, fittings and junction boxes. Exposed conduit shall be securely attached and supported by means of straps. The straps shall be installed at the recommended spacing as specified in CEC Section 12-1114. The straps must allow for linear expansion and contraction of the conduit due to temperature change. If the variance in
temperature exceeds 25°F (14°C), expansion joints shall be installed
according to the manufacturer's recommendations.
If Plastic Trends rigid PVC conduit is embedded in concrete or direct buried, support straps are not required.